|
 
|
Single end square nose, two flute, and multi flute, regular length, long flute length and extra long length
single end, square end end mills are designed for production milling of slots, pockets, keyways and other general purpose work. Material: HSS Finishing: fully ground/tin coated Made to DIN844, DIN327, ISO, ANSI standard |
 
|
Single end bal nose, two flute, multi flute, regular length, long flute length, and extra long length
single end, ball nose End Mills may be used for milling radius bottom slots, fillets, rounding the bottoms of holes and all-round use in die work. Material: HSS Finishing: fully ground/tin coated Made as per DIN844, DIN327, ISO, ANSI standard |
|
End mills with parallel shank
Used for a wide range of milling such as slotting and surface milling, three type of teeth, coarse, middle and fine Material: HSS Finishing: fully ground/tin coated Made to Din/ISO/ANSI standard |
|
End mills with threaded shank
Threaded shank made as per BS122 |
|
Single end two flute, regular length and extra long length, For aluminum
These Endmills are designed to cut aluminum and non-ferrous materials at high material removal rates, therefore, providing better work piece tolerances, surface finishes and cuts without vibration, chatter or scaring. Material: HSS Finishing: fully ground Made to DIN/ISO/ANSI standard |
|
Roughing end mills, with center cutting
Roughing end mills, with center hole Roughing Endmills are used for heavy machining operations where maximum stock removal at high feed rates is required. Available in standard regular length series and long series. Material: HSSM2-AL, Finishing: ground, milled |

|
Double ended end mills
Two flute, square nose, ball nose Four flute, square nose, ball nose Material: Hss As per ISO/DIN/ANSI standard |
|
End mills with mores taper shank
Single End, Multi flute Material: Hss As per ISO/DIN/ANSI standard |

|
End mills with threaded shank
Material: Hss Threaded shank made to Standard: BS122 Finishing: Solid Ground |
 
|
Micro grain solid carbide end mills, TiALN Coating
M icro-Grain Solid Carbide End Mills were developed for machining tough work hardening metals, stainless steel, titanium, monel, inconel, and super alloys. It is extremely shock resistant Single End, two flute, square nose, ball nose Single End, four flute, square nose, ball nose |

|
HSS SLITTING SAWS
Outside dia:60 -200mm Thickness:1.0 -6.0mm Dia of hole:16.0 -32.0mm Special sizes as per buyer’s request available |
| |
|