Chinese  |  English   
Products Search
  Home Products About Us Certificates News Environmental Protection Inquiry Contact Us Site Map
 
Products
 
Generators
Casing and Tubing
Tools
Pumps
Valves
Packaging Machine
Chemical Products
Engineering machine
Bicycles
Cloths
Furnitures
Minerals
Cutting Tools
 MILLING CUTTERS
 DRILL AND COUNTERBORES
 REAMERS
 TAPS AND DIES
 DIAMOND TOOLS
Packaging machine
Semi-trailer
 
Catalog Download
 

 
Products   →  Cutting Tools →  MILLING CUTTERS  
 
 
 
MILLING CUTTERS
 
MILLING CUTTERS

Single end square nose, two flute, and multi flute, regular length, long flute length and extra long length

single end, square end end mills are designed for production milling of slots, pockets, keyways and other general purpose work.
Material: HSS
Finishing: fully ground/tin coated
Made to DIN844, DIN327, ISO, ANSI standard

Single end bal nose, two flute, multi flute, regular length, long flute length, and extra long length

single end, ball nose End Mills may be used for milling radius bottom slots, fillets, rounding the bottoms of holes and all-round use in die work.
Material: HSS
Finishing: fully ground/tin coated
Made as per DIN844, DIN327, ISO, ANSI standard

End mills with parallel shank

Used for a wide range of milling such as slotting and surface milling, three type of teeth, coarse, middle and fine
Material: HSS
Finishing: fully ground/tin coated
Made to Din/ISO/ANSI standard

End mills with threaded shank

Threaded shank made as per BS122

Single end two flute, regular length and extra long length, For aluminum

These Endmills are designed to cut aluminum and non-ferrous materials at high material removal rates, therefore, providing better work piece tolerances, surface finishes and cuts without vibration, chatter or scaring.
Material: HSS
Finishing: fully ground
Made to DIN/ISO/ANSI standard

Roughing end mills, with center cutting

Roughing end mills, with center hole
Roughing Endmills are used for heavy machining operations where maximum stock removal at high feed rates is required.
Available in standard regular length series and long series.
Material: HSSM2-AL, Finishing: ground, milled

Double ended end mills

Two flute, square nose, ball nose
Four flute, square nose, ball nose
Material: Hss
As per ISO/DIN/ANSI standard

End mills with mores taper shank

Single End, Multi flute
Material: Hss
As per ISO/DIN/ANSI standard

End mills with threaded shank

Material: Hss
Threaded shank made to Standard: BS122
Finishing: Solid Ground

Micro grain solid carbide end mills, TiALN Coating

M icro-Grain Solid Carbide End Mills were developed for machining tough work hardening metals, stainless steel, titanium, monel, inconel, and super alloys. It is extremely shock resistant
Single End, two flute, square nose, ball nose
Single End, four flute, square nose, ball nose

HSS SLITTING SAWS

Outside dia:60 -200mm
Thickness:1.0 -6.0mm
Dia of hole:16.0 -32.0mm
Special sizes as per buyer’s request available


1

Address: No.25, Baoding Road, Heping District,Tianjing,China 300040 Designed By ThomasChina
Tel:0086-22-6097 0706 0086-22-6097 0701 Fax : 0086-22-6097 0700 E-mail : tmee@tmee.com.cn
Tianjin Machinery & Electric Equipment IMP & EXP. Co., Ltd. All Rights reserved.